Measurement parameters |
| Defect depth measurement range, mm | from 2,00 to 5 000,00 (по стали) |
| Depth measurement error, no more, mm | ±(0,5 + 0,02Н) |
| Thickness control range, mm | from 2,0 to 5 000,0 (по стали) |
| Discrete readings, mm | 0,100 |
Ultrasonic testing parameters |
| Velocity range of ultrasound, m/s | from 100 to 15 000 in steps of 1 |
| Operating frequency range of the receiving path, MHz | from 0,200 to 12,000 |
Signal display |
| Sweep delay, ms | from -2,0 to 1 655,0 (от -2 мм до 5000 мм) |
| Reamer types | A / B |
Calibration |
| Temporary Sensitivity Adjustment (TCG), dB | from 0 to 80 |
Generator |
| Probing pulse repetition rate, Hz | 30 / 60 / 120 / 250 / 500 / 1 000 |
Receiver |
| Gain adjustment range, dB | from 0,0 to 100,0 (с шагом 0,5 или 1) |
| Cut-off from screen height, % | from 0 to 100 (компенсированная, линейная) |
Memory |
| Number of results stored | 400 (изображений развертки типа А) / 4 000 (значений глубиномера) |
| The number of stored settings (control modes) | 400 |
Interface |
| USB | yes |
Transducer |
| Nominal frequency, MHz | 0,400 / 1,250 / 1,800 / 2,500 / 5,000 / 10,000 |
Display |
| Viewable area size, mm | 114 x 83 |
Power supply |
| Work without power supply | yes |
| AC operation | yes |
Batteries |
| Battery run time, h | 14,0 |
| Battery placement method | built in |
| Operating supply voltage, V | 12,0 |
AC power requirements |
| Connection method | external power supply |
| Mains voltage, V | 220 |
| AC frequency, Hz | 50 |
Environmental protection |
| International protection marking | IP64 |
Dimensions and weight |
| Height, mm | 145,0 |
| Width, mm | 245 |
| Thickness, mm | 77,0 |
| Weight, kg | 2,200 |
Operating conditions |
| Operating temperature range, °C | from -10 to +50 |
