Basic options |
| Device type | portable |
Measurement parameters |
| Timing Modes | 0 to the first signal in a zone or between signals in zones / along the front / to the maximum signal or by transition "through 0" |
Compliance with industry standards |
| Support for AWS D1.1 Weld Inspection Standard | no |
Ultrasonic testing parameters |
| Velocity range of ultrasound, m/s | from 1 000 to 20 000 |
| Automatic ultrasonic speed calibration | no |
Control parameters |
| Maximum length of material to be controlled, mm | 800 (steel, echo mode) / 1 600 (steel, shadow mode) |
| Automatic calibration of the control range at a given joint thickness | no |
Signal display |
| Sweep, ms | from 0,0 to 1,8 (0-5 mm) / from 0,0 to 800,0 (0-800 mm, steel) |
| Sweep delay, ms | from 0,0 to 347,0 |
| Chart view | A-scan |
| Comparison with stored reference | no |
Calibration |
| Automatic prism delay calibration | no |
| Temporary Sensitivity Adjustment (TCG), dB | from 0 to 20 (linear) |
| Curve Amplitude-Distance (ARC) | no |
| ARD function | нет |
Generator |
| Probing pulse type | radio pulse, amplitude 200 V, with an adjustable number of periods from 0.5 to 2, with a step of 0.5 (half of the frequency period) |
| Probing pulse repetition rate, Hz | 400 |
Receiver |
| Gain adjustment range, dB | 92,0 in steps of 0,5 |
| Amplifier | wideband 0.5-20 MHz (-6 dB) |
| Digital signal filtering | no |
| Analog signal filtering | no |
| Amplitude measurement | as a percentage of screen height / in dB relative to the threshold level in the zone |
| Cut-off from screen height, % | from 0 to 80 (compensated) |
| Detection | complete / radio signal (over the entire sweep range) |
| Additional key +dB | no |
Memory |
| Number of results stored | 1 000 (control protocols with A-scan) |
| The number of stored settings (control modes) | 900 (with A-signal and name) / 900 (typical transducers) |
Automatic signaling of defects |
| Controlled parameters | defect in the first zone / defect in the second zone / defect in the first and second zones / defect in one of the zones |
| Zones of control | two independent zones, start and width change over the entire sweep range / threshold levels are set from 0 to 95% of the screen height when detecting and from -95% to +95% for a radio signal in 1% steps / individual logic for detecting defects |
Regional settings |
| Interface language | russian / english |
Interface |
| USB | yes |
Transducer |
| Connectors | 2 x Lemo FFA.00 |
| Coordination with third party converters | no |
Display |
| Screen type | color high contrast TFT |
| Number of pixels | 320 x 240 |
| Viewable area size, mm | 44 x 58 |
| Special mode for working under bright sunlight | yes |
| Changing colors | yes |
| Processing the image on the screen after "freezing" the screen | static picture |
| Automatic Image Rotation | yes |
Power supply |
| Work without power supply | yes |
| AC operation | yes |
Batteries |
| Battery placement method | built in |
| Battery type | Li-Pol |
| Operating supply voltage, V | 3,7 |
| Total capacity, mA/h | 3 500 |
AC power requirements |
| Operating supply voltage, V | 5 |
| Current strength, A | 2,5 |
Dimensions and weight |
| Height, mm | 155,0 |
| Width, mm | 65 |
| Length, mm | 28 |
| Weight, kg | 0,240 |
Operating conditions |
| Operating temperature range, °C | from -25 to +55 |
