Leak test plant EXPERT NK could be assembled on the base of POLIGAN pump or diaphragm vacuum pump (NVM-5). It aims at pumping air, nonaggressive to aggregate material gases, vapour and gas-vapour mixtures free from mechanical impurity out of pressurized volumes from atmospheric to ultimate vacuum pressure.

The main types of controlled objects –reservoirs, boilers, steel and plastic pipelines, fuel tanks, coating and other objects with one-sided access. The plant provides the leak test which is based on the bubble test and includes the following stages:

1. The application of foaming indicator on the inspected surface.
2. Putting of a vacuum box on the inspected surface and creating vacuum between them.
3. Visual control of bubble flows in leaking areas.

POLIGAN and NVM-5 pumps are made in moderately cold climatic category of location 4.2 (Government Standards GOST 15150-69) and can be used in explosion- and fireproof places at environmental atmospheric pressure from 630 to 800 mm hg and environmental and pumping temperature from +10°C to +35°C.

Pump engine requires 220V and 50 Hz single phase AC power supply.

Normal climatic factors and pumping environment (according to GOST 15150-69) and the quality of electrical power (according to GOST 13109-87) provide the speed of action and ultimate vacuum pressure of the pump.

The expert package of the leak test plant “EXPERT NK” includes the vacuum pump POLIGAN which has an electronic remote control built-in and a coarse air filter which helps to activate both air pumping out and in.

• Patented in-house design for convenient control and low energy consumption of the testing operator.
• Possibility to conduct control without preliminary preparation of the inspected surface.
• Possibility of changing boxes to provide the control of items of different shapes.
• Possibility to conduct control immediately after welding.
• The objects with one-side access can be controlled without test pressure.
• Increased vacuum pump engine operational life.*
• Coarse filter.*
• Remote control for the pump and the pressure regulation unit.*

*refers to the pumps of POLIGAN type

Compliance with standards:

• Patent No. 2636409 dated 11/23/2017 issued by Federal Service for Intellectual Property;
• Trademark certificate (service mark) No. 637076 dated 11/27/2017 issued by Federal Service for Intellectual Property;
• Patent No. 2644024 dated 02/07/2018 issued by Federal Service for Intellectual Property;
• Patent No. 34453 dated 07/10/2020 issued by «Natiоnal Institute of Intellectual Property» RSE, Ministry of Justice of the Republic of Kazakhstan;
• Patent No. 23384 dated 01/09/2018 issued by National Center of Intellectual Property;
• Declaration of Conformity ЕАЭС № RU Д-RU.РА04.В.26178/23 dated 06/01/2023 issued by Eurasian Economic Union.

Previous

Next

There are no reviews for this product yet.. Write the first review.