The AL type sensor is a unique development of NPP "Mashproekt" and has no analogues in the world. The 65 mm tip allows measurements in the most difficult to reach places: small holes up to 65 mm deep, between gear teeth, grooves, recesses, etc. The sensor is designed for a load of 50N (5 kg).

Probe type "A" is used for hardness control:

• carbon and structural steels,
• surface-hardened products (carburizing, nitriding, hardening with high frequency current, etc.),
• heat-resistant, corrosion-resistant, stainless and other steels,
• electroplated coatings (chromium), surfacing,
• products of complex configuration (gear teeth, shafts),
• thin-walled and small-sized products,
• products made of fine-grained materials in the local study of the properties of materials.

Functionally, the sensor consists of a body and a protective cap. The protective cap (nose) of the sensor is used to protect the rod from overload and contact of the rod with foreign objects during measurements. When measuring hardness in hard-to-reach places, it is permissible to remove the protective cap, while the permissible parameters of the holes / grooves will be changed.

The sensor has a built-in Lemo connector. The connecting cable is sold separately.

• Stable readings regardless of the force and time of pressing the sensor to the controlled surface.
• The spatial position of the sensor does not affect the measurement result.
• Ultra-small area of the control zone - from 1 mm.
• Inspection in grooves and blind holes with a diameter from 10 mm / from 5 mm with the spout removed.
• Inspection in grooves and holes up to 60 mm deep / up to 65 mm with nose removed.
• Almost invisible imprint on "mirror" surfaces.
• Low sensitivity to surface curvature, thickness and weight of the product.
• Durable aluminum alloy housing ensures long service life.

• sensor type "AL" (without connecting cable).

There are no reviews for this product yet.. Write the first review.