127410, Российская Федерация, Москва, Алтуфьевское ш., д.41А, email: info@expertnk.ru
+7(495) 660 94 49 (многоканальный номер)
8 (800) 250 94 49 (бесплатный для регионов)
+7(495) 660 94 49 (многоканальный номер)
8 (800) 250 94 49 (бесплатный для регионов)
- Certification Of Specialists
- Laboratory Accreditation
- NDT Devices & Means
- Calibration Of NDT Funds
USD-46 PRO - ultrasonic flaw detector
Price level: Retail
| Retail | checkout at the office; |
| Online Starter* | entry level benefits; |
| Online 1..5* | five steps: more orders - more benefits; |
| Online Wholesale* | maximum benefit; |
| Online VIP* | individual discount. |
* valid only for orders placed on the site, according to the standard templates of contracts and accounts, it is mandatory to accept the Confidentiality Conditions for the information of an individual offer
Ultrasonic flaw detector USD-46 PRO is a deep modernization of the classic flaw detector USD-46:
- the latest modern electronic base;
- the possibility of subsequent upgrade to the older version of the flaw detector on phased arrays USD-46FR according to the license code;
- modern frost-resistant TFT display with a resolution of 640x480 pixels.
The USD-46 PRO flaw detector is a versatile, lightweight, portable and powerful ultrasonic testing tool adapted for future upgrades and expansion. In the basic version, the flaw detector is supplied as an ultra-modern classic hand-held flaw detector for field, workshop and other work that requires mobility, simplicity and wide functionality.
The ultrasonic flaw detector is equipped with a powerful adjustable oscillator and a low-noise broadband receiver of the latest generation with a set of narrow-band filters to improve the signal-to-noise ratio. The database of transducers allows you to load all their parameters from memory in one click, including DGS diagrams. Rich functionality, including TCG and ADC functions, various degrees of signal damping, signal envelope and multi-echo averaging function, as well as two independent control zones with individual defect detection logic, allows you to implement any modern testing methods.
Distinctive features
- The function of automatic calibration of the transducer prism on standard samples CO-3 and V-2, automatic calibration of the real velocity in the material of the test object, automatic calibration of the control zone for the direct and single beam.
- Built-in assistant for geometry calculation when inspecting welded joints - allow you to make the setup procedure easy and understandable.
- The scalable software structure allows you to independently increase the capabilities of the device to the basic version with phased arrays operating on the basis of TFM / FMC digital focusing algorithms with 16-channel phased array converters.
- High-precision thickness measurement and the use of active electromagnetic-acoustic (EMA) transducers make it possible to carry out thickness measurement of the product wall under layers of non-conductive coatings of any structure and without rust removal.
- The device has a robust housing made of ABS plastic.
- A unique frost-resistant modern screen with a 640x480 TFT color matrix, excellent performance and a wide viewing angle is the best choice for working in the field in bright sunshine, as well as at low temperatures.
USD-46 PRO (standard kit)
- electronic unit USD-46 PRO with built-in Li-Pol battery;
- AC power supply 15V / 220V;
- protective cover with a hood and fastening on the operator's body;
- cable Lemo00-Lemo00 1.5 m - 2 pcs.;
- ultrasonic transducer (optional) - 4 pcs.;
- USB cable for communication with PC;
- software on CD;
- set of documentation (user manual, passport with verification procedure, metrological verification certificate);
- carrying case.
Code: 62140
441 000 руб.
delivery time to 10 days
BuyUSD-46 PRO (aviation kit)
- electronic unit USD-46 PRO with built-in Li-Pol battery;
- AC power supply 15V / 220V;
- protective cover with a hood and fastening on the operator's body;
- cable Lemo00-Lemo00 1.5 m - 2 pcs.;
- ultrasonic transducer SF2512;
- ultrasonic transducer SC5006;
- ultrasonic transducer AN5065;
- ultrasonic transducer AN2540;
- ultrasonic transducer DF5012;
- ultrasonic transducer AN2565;
- ultrasonic transducer P121-1.8-PR60;
- ultrasonic transducer P121-1.25-PR63;
- ultrasonic transducer SF5010;
- sample standard RSO-UZL;
- sample standard RSO-UZSh;
- USB cable for communication with PC;
- software on CD;
- set of documentation (user manual, passport with verification procedure, metrological verification certificate);
- carrying case.
504 000 руб.
delivery time to 10 days
BuyCertificates
Compliance with standards:
- Type approval certificate for measuring instruments No. 85073-22 dated 04/13/2022 issued by Federal Agency for Technical Regulation and Metrology.
Technical Data
Manuals & Software
 | Manual для USD-46 PRO |
Measurement parameters | |
| Timing Modes | from 0 to the first signal in the zone or between signals in zones / along the front / to the maximum signal or by passing through "0" |
Compliance with industry standards | |
| Support for AWS D1.1 Weld Inspection Standard | with automatic calculation D1.1 Ratio |
Ultrasonic testing parameters | |
| Velocity range of ultrasound, m/s | from 1 000 to 10 000 (in steps of 1, 10, and 100) |
| Automatic ultrasonic speed calibration | yes |
Control parameters | |
| Maximum length of material to be controlled, mm | 3 000 (echo mode) / 6 000 (shadow mode) |
| Automatic calibration of the control range at a given joint thickness | yes |
| Using Scanners | no |
| B-scan | no |
| Using TOFD | no |
Signal display | |
| Sweep, ms | from 0,0 to 2,0 (0 - 5,9 mm) / from 0,0 to 1 000,0 (0 - 5950 mm, steel, in steps of 0.01, 0.1, 1, 10, 100) |
| Chart view | A-scan |
| Comparison with stored reference | automatic throughout the gain range |
| Defect size estimation | built-in DGS diagrams |
Calibration | |
| Delay in transducer protector/prism, ms | from 0 to 100 (in steps of 0.01, 0.1, 1) |
| Automatic prism delay calibration | according to CO-3, V-2, sample with a reflector |
| Temporary Sensitivity Adjustment (TCG), dB | from 0 to 70 (with the construction of a curve by 20 reference points entered manually or from control reflectors) |
| Curve Amplitude-Distance (ARC) | construction by 20 points, adjustable in height |
| ARD function | construction by 20 points, adjustable in height / with automatic gain linkage and two additional curves |
Generator | |
| Damping, Ω | 25 / 50 / 1 000 |
| Probing pulse type | radio pulse, amplitude 50 V, with adjustable number of periods (0.5-5) and variable frequency |
| Probing pulse repetition rate, Hz | from 50 to 500 (in steps of 1, 5, 10, and 100) |
Receiver | |
| Gain adjustment range, dB | 100,0 (in steps of 0.1, 0.5, 1, 2, 6 or 10) |
| Amplifier | broadband (0.5-20 MHz (-6 dB) with selectable narrow band filters) |
| Digital signal filtering | yes |
| Analog signal filtering | yes |
| Amplitude measurement | as a percentage of screen height / in dB relative to the threshold level in the zone / in dB relative to the reference signal / in dB relative to amplitude-distance curve |
| Cut-off from screen height, % | from 0 to 80 (compensated) |
| Detection | positive or negative half wave / complete / radio signal (over the entire sweep range) |
| Additional key +dB | programmable |
| Input impedance, Ω | 50 / 600 |
Memory | |
| Number of results stored | 1 000 (control protocols: signal, envelope, measurement result, instrument operation parameters, date, time) |
| The number of stored settings (control modes) | 200 (with A-signal) |
Automatic signaling of defects | |
| Controlled parameters | defect in the first zone / defect in the second zone / defect in the first and second zones / defect in one of the zones / according to ARC - comparison of the signal in the first zone with the amplitude-distance curve |
| Zones of control | two independent zones, start and width change over the entire sweep range / threshold levels are set from 0 to 95% of the screen height when detecting and from -95% to +95% for a radio signal in 1% steps / individual logic for detecting defects |
| Notification method | light for each zone separately / sound |
Regional settings | |
| Interface language | russian / english |
Interface | |
| USB | yes |
Transducer | |
| Connectors | 2 x Lemo FFA.00 |
Display | |
| Screen type | color high contrast TFT |
| Number of pixels | 640 x 480 |
| Viewable area size, mm | 130 x 100 |
| Special mode for working under bright sunlight | yes |
| Changing colors | yes |
| Processing the image on the screen after "freezing" the screen | full-featured processing and analysis |
Power supply | |
| Work without power supply | yes |
| AC operation | yes |
Batteries | |
| Battery run time, h | 10,0 |
| Battery type | Li-Pol |
| Operating supply voltage, V | 11,1 |
| Total capacity, mA/h | 5 000 |
AC power requirements | |
| Connection method | external power supply |
| Operating supply voltage, V | 15 |
| Current strength, A | 2,5 |
Environmental protection | |
| Frost resistance | yes |
Dimensions and weight | |
| Height, mm | 205,0 |
| Width, mm | 160 |
| Length, mm | 43 |
| Weight, kg | 0,950 |
Operating conditions | |
| Operating temperature range, °C | from -30 to +55 |
Service life and warranty | |
| Warranty period, months | 36 |
There are no reviews for this product yet.. Write the first review.
Отзыв
Find out about the arrival
Call us
Have questions? Call us!
+7(495) 660 94 49 (multichannel)
8 (800) 250 94 49 (free for regions)
