Checking squares UP - flat locksmith squares UP type according to GOST 3749-77 are intended for checking and marking right angles (90°). They are used to control the perpendicular arrangement of parts in the process of fitting and assembly and curvature work.
The long and short sides of the square have two flattened surfaces each, which form the inner and outer working corners. The outer working angle of the bench square is used when checking the inner corners of parts, the inner one when checking the outer corners. To mark the corners, a test square is placed on the surface of the part, after which the desired angle profile is outlined with a scribe.
EAEU HS code: 9017 80 900 0
Material: stainless steel.
Package includes
- square UP EXPERT NK (metal flat);
- case;
- the passport.
Square unit UP EXPERT NK (flat locksmith) 160х100 class 2
Code: 73S321
1 440 руб.
1 428 руб. from 10 pcs.
1 440 руб.
1 416 руб. from 100 pcs.
in stock
BuySquare unit UP EXPERT NK (flat locksmith) 100х60 class 2
Code: 73S319
1 200 руб.
1 188 руб. from 10 pcs.
1 200 руб.
1 176 руб. from 100 pcs.
in stock
BuySquare unit UP EXPERT NK (flat locksmith) 60х40 class 2
Code: 73S323
1 188 руб.
1 176 руб. from 10 pcs.
1 188 руб.
1 164 руб. from 100 pcs.
in stock
BuySquare unit UP EXPERT NK (flat locksmith) 160х100 class 1
Code: 73S320
out of stock
Notify on arrivalSquare unit UP EXPERT NK (flat locksmith) 100х60 class 1
Code: 73S318
out of stock
Notify on arrivalSquare unit UP EXPERT NK (flat locksmith) 60х40 class 1
Code: 73S322
in stock
To Order