Retail | checkout at the office; |
Online Starter* | entry level benefits; |
Online 1..5* | five steps: more orders - more benefits; |
Online Wholesale* | maximum benefit; |
Online VIP* | individual discount. |
* valid only for orders placed on the site, according to the standard templates of contracts and accounts, it is mandatory to accept the Confidentiality Conditions for the information of an individual offer
Highly sensitive radiographic technical film Tasma PT-1B (sensitivity according to TU 2372-057-00205156-2003 not less than 35 p-1) is intended for radiographic inspection of large-diameter pipes of main oil and gas pipelines, parts and assemblies, thick cast products, reinforced concrete and heavy structures by transillumination using X-ray, gamma radiation and bremsstrahlung of electron accelerators.
The basis of the X-ray film Tasma RT-1V is polyethylene terephthalate, dyed in blue in the mass with a thickness of 175 ± 10 microns according to TU 6-41-1576-93.
As a packaging material, a light-protective and moisture-proof plastic bag is used, which is inert to photographic layers. Each sheet of film is lined with white paper on both sides.
30x40 cm, 75 sheets per box;
24x30 cm, 100 sheets per box.
Unexposed film should be stored in consumer packaging on racks in a ventilated room at a temperature of 14°C to 22°C and a relative humidity of 50% to 70%, where gases harmful to the film should not penetrate. It is not allowed to store the film in rooms where radioactive substances and luminous compositions of permanent action are located.
Film RT-1V is designed for manual processing.
Opening of the package and chemical-photographic processing of the film should be carried out under non-actinic lighting created by a laboratory lamp with a 15-25 W electric lamp shielded with a protective dark red light filter No. 107 according to TU 6-43-00205133-03-91.
Recommended solutions for manual processing:
developer "X-ray-2" and fixer BKF-2;
in solutions of chemical reagents "TRT-301", "X-ray-2T".
Development time 4 - 8 min./(20.0 ± 0.5)°С.
Fixing no more than 15 min./(20.0 ± 2.0)°С.
Инструкция по применению |
Qualitative characteristics | |
Sensitivity, R-1 | 35,0 |
Contrast ratio G, medium | 3,2 |
Processing options | |
Fixing temperature, °C | from +18,0 to +22,0 |
Development temperature, °C | from +19,5 to +20,5 |
Service life and warranty | |
Shelf life in unopened packaging, months | 12 |
There are no reviews for this product yet.. Write the first review.